The American G62-75T75-4PV 401 is the factory propane version of the 74-gallon nominal ProLine high-capacity atmospheric-vent water heater. It has 75,100 BTU/h input, side-loop connections and a six-year limited tank and parts warranty. For a replacement, we assess the propane supply and venting along with the household’s hot-water demand.
When this 74-gallon model is worth comparing
This model can be worth comparing where a smaller propane tank runs short during concentrated demand. The amount of water drawn and the time between uses matter more than a simple household-size label. We review the fixture flow and usage pattern before deciding whether the 74-gallon tank offers the right reserve.
American lists 71 gallons of rated storage and a 125-gallon first-hour rating for this exact model. First-hour performance includes reheating during a test, so it should be used alongside the home’s actual draw pattern. It is not a promise that every installation can deliver 125 gallons continuously at a particular fixture temperature.
G62-75T75-4PV 401 specifications
| Exact model | G62-75T75-4PV 401 |
|---|---|
| Fuel | Propane |
| Nominal capacity / rated storage | 74 gallons / 71 gallons |
| Input | 75,100 BTU/h |
| First-hour rating | 125 gallons, as listed on the exact product page |
| UEF | 0.60 |
| Thermal efficiency | 80%; separate from UEF |
| Side loop | Yes |
| Product-page dimensions | 57 inches high × 26.39 inches diameter |
| Catalog drawing references | A: 61 inches; B: 58½ inches; C: 26½ inches; see notes below |
| Top water connections | 1-inch male NPT per catalog |
| Insulation blanket supplied | No |
| Limited warranty | 6-year tank and 6-year parts; conditions apply |
Side-loop connections and replacement piping
This is the Side Loop: Yes configuration. The current product page lists top water connections as well as side loops. In the August 2026 American catalog, the G and H side-connection references are 15½ and 50¼ inches. Those references help compare piping layouts, but the actual supplied connections still need to be checked before installation.
Side taps are connection points, not a complete circulation system. If a home uses a return loop, we review its piping and controls as part of the replacement. The presence of taps alone does not establish that a circulation pump or its controls are included. If the existing system uses only top connections, that should be clear in the installation plan as well.
Gas supply, atmospheric venting and service access
At 75,100 BTU/h, this heater needs a supply assessment that includes the propane regulator, piping and other connected appliances. Its input is considerably higher than the 37,000 BTU/h rating of the G61-50T40R 401. A replacement should not inherit an undersized supply arrangement simply because both heaters burn propane.
This is an indoor atmospheric-vent model, and American states that its controls do not require an external electrical connection. We still assess the vent route, its condition and the combustion-air supply. An existing connector that physically reaches the new draft hood is not enough to establish a suitable vent installation.
The tank is wider than the smaller tall ProLine models. We check the access route and working space, including room to reach the drain, burner area and anode after installation. The replacement should leave a serviceable system, rather than simply fill the available footprint.
Dimensions and manufacturer document notes
The product page lists a height of 57 inches and diameter of 26.39 inches. The August 2026 catalog’s model table gives A = 61 inches at the draft-hood reference, B = 58½ inches at the upper water-connection reference and C = 26½ inches in diameter. Use the drawing to plan the installation envelope, allow additional vent and service space, and confirm the supplied unit for a tight fit.
The product page also lists a 5-inch flue-diameter field, while the catalog lists a 4-inch draft hood. These separately labeled figures should not be used alone to size a vent. The installer must review the supplied hood, the complete vent system and the instructions that apply to the delivered model.
American’s product-page spec-sheet link currently opens NRGSS00115, which does not contain this high-capacity model in its table. The official catalog linked below does. The linked manual, 100263114, is a general residential FVIR gas manual; confirm the applicable supplied manual before using its connection or venting details. This guide does not infer FVIR construction from that download link.
Compare the other capacity and fuel choices
The same-fuel 98-gallon G62-100T77-4PV 401 has 95 gallons of rated storage and a listed 170-gallon first-hour rating, compared with 71 and 125 gallons here. Its published input is also 75,100 BTU/h, and it is listed without side loops. The larger tank changes the reserve, physical fit and connection arrangement; it should not be treated as an identical replacement with extra capacity.
For the other fuel, see the G62-75T75-4NOV 400 natural gas guide. For a smaller same-fuel option, compare the 50-gallon G61-50T40R 401. The American Water Heaters page and our water heater model catalog collect the other available guides.
Maintenance and warranty
Choose an installation layout that leaves the heater accessible for inspection and routine care. A self-cleaning dip tube does not eliminate maintenance. We discuss a care schedule based on the home’s water conditions and keep the model and serial number available for future parts or warranty questions.
The six-year limited tank and parts warranty is subject to American’s written eligibility requirements and exclusions. It is not six years of free removal or installation labor. Keep the purchase and installation records and review the certificate for the intended application.
Frequently asked questions
Does this 74-gallon model have side-loop connections?
Yes. American lists Side Loop: Yes for this exact model. The catalog drawing identifies lower and upper side-connection references at 15½ and 50¼ inches. Confirm the supplied unit’s arrangement before laying out replacement piping.
Is G62-75T75-4PV 401 natural gas or propane?
G62-75T75-4PV 401 is the factory propane model, rated at 75,100 BTU/h. Select the correct fuel configuration and check the complete model number on the data plate. Do not treat the natural-gas and propane versions as interchangeable.
Why is it called a 74-gallon heater when the model number contains 75?
American lists 74 gallons of nominal capacity and 71 gallons of rated storage for this model. The published 125-gallon first-hour rating includes reheating under a test procedure and is not the amount stored in the tank.
Will it fit where my existing 75-gallon heater sits?
The old capacity label alone cannot answer that. Compare the delivered unit with the space, doorway, pan, piping and vent. The catalog shows a 61-inch draft-hood reference and a 26½-inch diameter, with additional installation and service space required.
Does the six-year warranty cover installation labor?
American lists six-year limited tank and parts coverage, subject to its written terms. Removal, installation labor and related expenses are generally excluded. Retain the purchase and installation records along with the model and serial number.
Official American product documents
- G62-75T75-4PV 401 product specifications
- American catalog, August 2026 — high-capacity specifications on printed page 34
- Manufacturer-linked manual 100263114 — confirm applicability as noted above
- American residential limited warranty 100287889
Specifications checked October 17, 2026. The photograph is the manufacturer’s representative high-capacity series image; dimensions and connection details must be confirmed for the exact model.